Step 1: Prepare the Application
Actions
1.1 Email info@mcttt.gov.fj requesting a copy of the application, or download the Form from FTIP or the website of the Department of National Trade Measurement and Standards, Ministry of Trade, Co-operatives, Micro, Small and Medium Enterprises, and Communications
1.2 Fill out the Application carefully and attach all the required documents.
Required Documents
- Application made in the standard application form
- Third-party accredited laboratory report
- Bill of lading
- Commercial Invoice
- Third Party or independent Accredited Laboratory Test Report (For Every Shipment)
A. Steel Bar
The test shall include the following specifications.
- Chemical Composition
- Yield stress (Re) and tensile strength
- Uniform elongation (Agt)
- Bending and rebending properties
- Mass per unit length
- Geometric properties
B. Mesh
B.1. Raw Materials of Mesh (Rod and hard-drawn wire)
The test shall include the following specifications.
- Chemical Composition
- Yield stress(Re) and tensile strength
- Uniform elongation (Agt)
- Mass per unit length
B.2. Final Product (Welded Mesh)
- The test shall include the following specifications.
- Chemical Composition
- Yield stress(Re) and tensile strength
- Uniform elongation (Agt)
- Weld shear strength
- Mass per unit length
Fees or Charges
NIL
Estimated Total Time
N/A
Contact Address
Ministry of Trade, Co-operatives, Micro, Small and Medium Enterprises, and Communications, Level 2 and 3, Civic Tower, Victoria Parade, Suva.
Phone: +679 3305411
e-mail: info@mcttt.gov.fj
Website: www.mcttt.gov.fj